What Is The Best Way To Keep A Kiddie Pool Clean With Salt?
After purchasing an inflatable kiddie pool, you will quickly discover how difficult it is to keep the water clean. The main reason is the PH value of the pool water, as well as the difficult-to-separate contaminants. However, you do not need to be concerned about these difficulties because, in comparison to in-ground pools, an inflatable pool may not require as much maintenance.
All you need to do is clean your pool on a regular basis. Let us first clarify our position on the use of salt and chlorine in children’s pools.
Chlorine is without a doubt the most effective solution for keeping pool water clean. A little inflatable kiddie pool, on the other hand, may not necessitate the application of chlorine. Instead, the saltwater and physical cleaning of the pool can accomplish the work for you.
In a pool, can you use salt instead of chlorine?
It is extremely typical to utilize saltwater in an inflatable pool. It is used to treat water without using any harmful chemicals. It’s a great substitute for chlorine and other chemicals that you’d find in a typical pool. By removing any health dangers from the water, the saltwater treatment helps you to maintain it safe for your child’s body.
As a result, one of the simplest ways to maintain kiddie pool water clean without chemicals is to utilize saltwater in an inflatable pool. You must be aware of the water filtration and cleaning procedure, as well as the amount of salt required.
The Advantages of Using Salt Water in a Kiddie Pool
The popularity of saltwater for kiddie pools can be attributed to a number of factors. The following are some of the advantages of utilizing saltwater to cure a kiddie pool:
It has no negative effects.
The most crucial advantage of utilizing saltwater is that it is completely safe and has numerous other health advantages for the skin. As a result, saltwater is widely regarded as a superior alternative to chlorine and related chemicals for pool water treatment.
It has no negative effects on the human body and is far less irritating to the eyes than chlorine or other chemicals.
It is cost-effective.
If you have a large pool, you should be aware of the costs of keeping an above-ground pool, even if it is only a simple pool. It’s due to the use of high-priced chemicals that come with chlorine. However, you don’t have to be concerned about these costs because saltwater treatment is both inexpensive and effective.
As a result, for a kiddie pool, you may always use saltwater treatment. Please keep in mind, however, that maintaining a regular pool may necessitate the addition of some chemicals.
Water becomes softer after being treated with saltwater.
Alright. Expenses are inevitable, but they should not detract from the pleasure of taking a swim in a pool. We all know that chlorinated water is a little tougher and dries out your skin. It’s because of chlorine’s fundamental qualities. Saltwater, on the other hand, has a similar effect, but the smoothness of your pool water will be noticeably different.
The salt has the same effect on pool water as it does on everyday life (using it as a water softener). If you don’t want your child to wind up with a touch of dried skin, you can opt for the saltwater therapy.
Saltwater has no odor.
The smell of chlorine in water may be tolerated by adults, but it is not tolerated by children. Fortunately, seawater is free of such odors and has no effect on your child’s experience. It means that merely switching to saltwater will eliminate the noxious chlorine odor.
Is There Any Risk to Your Health?
It’s crucial to comprehend the salt concentration in pool water in order to comprehend the potential health risks of swimming in saltwater. It is well recognized that the correct amount of salt will not harm a child’s health. Instead of utilizing chlorine, which has numerous health-related adverse effects, it is far superior.
Children who swim in chlorinated water had a higher risk of lung infections than children who swim in plain saltwater, according to a 2003 research.
Another factor to consider is the person’s location in the pool. The bottom of the inflatable pool, according to the research, has a higher percentage of salt than the pool’s surface. So, if you’ve added too much salt, it’s best to stay and breathe at the surface.
Overall, there are no known health risks associated with using saltwater in a kiddie pool.
How do you keep a salt-filled kiddie pool clean?
Are you concerned about the time-consuming process of treating saltwater? What about the PH value or an excessive amount of salt in the water?
We’ll go over each step in detail to make it easier for you.
A saltwater treatment is the process of cleaning a kiddie pool with salt. You have a variety of options when it comes to therapies. One way is to treat the salt so that it behaves like water. As previously said, a kiddie pool does not require much maintenance as long as the water PH is between 7.4 and 7.6.
The following are the steps for cleaning a pool with salt.
Remove the water from the pool.
The first step is to drain the pool because the old water may contain chlorine. It is also necessary to clean it in order to remove any leaves or trash. As a result, unhook the water cord and drain the pool completely.
Continue to the next step once the pool has dried out.
Clean the Surfaces and Walls
Before refilling your pool, clean the surface and walls to remove any algae or other creatures that may have grown there. To guarantee that no dirt particles remain in the pool, use a scrape or a new brush. Because you don’t want any other form of response with salt than to make saltwater, the method isn’t confined to cleanliness.
We recommend waiting until the pool is entirely dry after removing algae and other problems.
Refill and Season with Salt
Fill the pool with fresh water and salt it as needed. Please keep in mind that the amount of salt needed is determined by the pool’s dimensions, existing salt level, and the number of gallons it can contain. If your kiddie pool is 1500 gallons (the average baby pool is 1800 gallons) and you want to raise the salt level to 2800 ppm from 1200 ppm, you’ll need to add 25 pounds of salt.
If your kiddie pool is 200 gallons (the average baby pool is 150-200 gallons) and you want to raise the salt level to 3200 ppm (parts per million) from 1200 ppm, you’ll need to add 3.5 pounds of salt.
We also propose that you examine the water’s alkalinity and PH level.
The slow dissolving property of salt can affect the saltwater’s exact alkalinity reading. It should, however, have little effect, and you can keep measuring it every day.
The PH level should never fall below 7.2.
Keep the Swimming Pool Open
It’s best to keep your pool uncovered until the salt has completely dissolved in the water. Because a covered pool can cause algae and other problems, it will keep the water fresh.
What amount of pool salt do I require for my pool?
In the kiddie pool, the ideal level should be between 2700 and 3400 ppm, with 3200 ppm being preferable. Test your present salt level and the gallons of water in your baby pool before adding salt.
Check out our salt level calculator for a pool.
The most commonly used salt compound in the kiddie pool is epsom salt, also known as magnesium sulfate. It is gentler on children’s eyes than chlorine and performs a fantastic job of cleansing pool water. Epsom salt is used in a similar way as ordinary saltwater treatment.
As a result, you can purchase Epsom salt to suit your needs and use it to cure the water in the kiddie pool.
How Do You Use Salt To Keep An Inflatable Kiddie Pool Clean?
Alternatively, if you require a less expensive approach to keep the pool clean, salt can be used. Bacteria and viruses that breed in water are inhibited by salt.
Because of its low solubility, granulated salt is preferred. As a result, it takes longer to liquefy in water. A step-by-step approach on keeping an inflatable kiddie pool clean with salt is provided below.
Clean And Empty The Pool
First and foremost, clean the pool. Using the plug and the garden horse, drain all of the water. Then scrub the pool walls well with a scrubbing brush.
You can use any cleaning chemical you have on hand, and if possible, test the ph of the water at this point.
Clean with salt.
You can now use salt as a sanitizer after cleaning the pool. To determine the required amount, you must first calculate the total surface area of the pool.
If your pool is circular, find its radius and then use it to compute the area of a circle.
Control the Acidity
The working of salt is affected by high acidity levels. If the ph of your pool water is less than 7.2, you should use sodium disulphate to boost it and restore its alkalinity.
During the day, keep the pool covered as much as possible. Covering the pool reduces air circulation, allowing algae and other bacteria and viruses to flourish.
The good news is that you can use the same procedure to keep the water in your paddling pool clean as well.
What Is The Best Way To Use A Kiddie Pool Sanitizer?
Some people, in addition to utilizing salt, employ chlorine to sterilize their pools. Chlorine is more soluble than salt and also lasts longer.
Sanitizing with chlorine sanitizer is almost same to sanitizing with salt.
Empty the pool first, then scrub the inflatable pool walls completely with a scrubbing brush. Now pour in some fresh water.
If you haven’t tested the ph of your pool in a while, you should do so now and modify it as needed. The pool’s ph should be between 7.2 and 7.4.
Now you can add chlorine to the pool according to its size. Similarly, leaving the pool uncovered on a frequent basis for greater air circulation, which minimizes the formation of algae and other germs and viruses, would be beneficial.
Saltwater treatment is, without a doubt, the best option for a kiddie pool. To determine the influence of saltwater on the pool, we used the water volume and difficulties with the kids’ skin as the key factors. For a kiddie pool, saltwater is far superior to chlorinated water. However, for a conventional pool, things may be different, and we recommend that you choose the chemicals properly.
Consider evaluating the alkalinity of the water and treating it accordingly if you believe the salt in it is excessive.
Additional article discussing the use on an intex krsytal clear saltwater system for pools